top of page

Technical Specifications

Please be aware that the features/specifications can differ from country to country

Display System

Display System:    3 LCD system

Display device

Size of effective display area:    0.95” (24.1 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10

Number of pixels:    6,912,000 (1920 x 1200 x 3) pixels

Projection lens

Focus:    Powered / Manual (Depend on lens)

Zoom - Powered/Manual:    Powered / Manual (Depend on lens)

Lens shift - Powered/Manual:    Powered / Manual (Depend on lens)

Light source

Type    :Ultra high pressure mercury lamp

Wattage:    330 W type

System:    Twin lamp system

Recommended lamp replacement time *1

Lamp mode: High:    6000 H (With twin lamp sequence use)

Lamp mode: Standard:    8000 H (With twin lamp sequence use)

Filter cleaning / replacement cycle (Max.) *1

Filter cleaning / replacement cycle (Max.):    Same as the lamp replacement

Screen size

Screen size:    40” to 600” (1.02 m to 15.24 m) (measured diagonally) (Depend on lens)

Light output

Lamp mode: High:    7000 lm

Lamp mode: Standard:    5600 lm

Color light output

Lamp mode: High:    7000 lm

Lamp mode: Standard:    5600 lm

Contrast ratio (full white / full black) *2

Contrast ratio (full white / full black):    2500:1

Displayable scanning frequency

Horizontal:    14 kHz to 93 kHz

Vertical:    47 Hz to 93 Hz

Display resolution

Computer signal input:    Maximum display resolution: UXGA 1600 x 1200 dots*3

Video signal input:    NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 1080/30p*4

Color system

Color system:    NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60

Keystone correction (Max.)

Vertical:    +/- 5 degrees

OSD language

OSD language:    20-languages (English, Dutch, French, Italian, German, Spanish, Portuguese, Turkish, Polish, Russian, Swedish, Norwegian, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, Vietnamese, Arabic, Persian)

INPUT OUTPUT (Computer/Video/Control)

INPUT A:    RGB / Y PB PR input connector: 5BNC (female)

INPUT B:    RGB input connector: Mini D-sub 15-pin (female)

INPUT C:    DVI-D input connector: DVI-D 24-pin (Single link), supported HDCP

INPUT D:    HDMI input connector: HDMI 19-pin, HDCP support

INPUT E:    Optional adaptor slot (For HD-SDI/SDI Input Adaptor "BKM-FW16")

S VIDEO IN:    S-video input connector: Mini DIN 4-pin

VIDEO IN:    Video input connector: BNC

OUTPUT:    Monitor output connector*5: Mini D-sub 15-pin (female)

REMOTE:    RS-232C connector: D-sub 9-pin (female)

LAN:    RJ-45, 10BASE-T/100BASE-TX

Control S:    Control S input connector: Stereo mini jack, Plug in power DC 5V

Control S: output connector: Stereo mini jack

Acoustic noise

Lamp mode: Standard:    35 dB

Operating temperature / Operating humidity

Operating temperature / Operating humidity:    0°C to 40°C (32°F to 104°F) / 35% to 85% (no condensation)

Storage temperature / Storage humidity

Storage temperature / Storage humidity:    -20°C to +60°C (-4°F to +140°F) / 10% to 90% (no condensation)

Power requirements

Power requirements:    AC 100 V to 240 V, 4.8 A to 2.0 A, 50 Hz / 60 Hz

Power consumption

AC 100 V to 120 V    Lamp mode: High: 490 W

AC 220 V to 240 V    Lamp mode: High: 460 W

Power Consumption (Standby Mode)

AC 100 V to 120 V:    0.1 W (when “Standby mode” is set to “Low”)

AC 220 V to 240 V:    0.2 W (when “Standby mode” is set to “Low”)

Power Consumption (Networked Standby Mode)

AC 100 V to 120 V:    11.0 W (LAN) (when "Standby Mode" is set to "Standard")

AC 220 V to 240 V:    10.0 W (LAN) (when "Standby Mode" is set to "Standard")

Standby Mode / Networked Standby Mode Activated

Standby Mode / Networked Standby Mode Activated:    After about 10 minutes

Heat dissipation

AC 100 V to 120 V:    1672 BTU/h

AC 220 V to 240 V:    1569 BTU/h

Dimensions (W x H x D)

Dimensions (W x H x D): (without protrusions):    Approx. 530 x 204 x 545 mm (20 7/8 x 8 1/32 x 21 15/32 inches)


Mass:    Approx. 20 kg (44 lb)

Supplied accessories

Remote commander:    RM-PJ19

Optional Accessories

Replacement lamp:    LMP-F330

Projection lenses:    VPLL-4008/Z4007/Z4011/Z4015/Z4019/Z4025/Z4045/Z4007/FM22/ZM32/ZM42/ZP41/ZM102

Projection lens adapter:    PK-F500LA1, PK-F500LA2


*1    The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used.

*2    The value is average.

*3    Available for VESA Reduced Blanking signal.

*4    Available via BKM-FW16

*5    From INPUT A and INPUT B.

Environmental notice for customers in the USA    Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or see for additional information.


    bottom of page